RE: wire harness
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: wire harness



I have the manual for the 64 Fury on a CD from Detroit Iron.   The 
electrical diagrams list the color of the wire and size for all wiring.  
If you want to contact me directly I can answer questions off of the 
drawings.

ply64@xxxxxxxxxxxxx

Your project sounds very interesting.  I would be interested in knowing 
how it turns out.  This would be a great time to make changes to the 
electrical system such as bypassing the ampmeter, privisions for an 
electrical choke, possible provisions for an electrical radiator fan and 
headlight relays as a starter.

Dennis C. 


Sean B wrote:
> 
> Speaking of wire sizes, I'm making my own engine bay harness for my '64 
> Fury.  Any suggestions on what guage wire I should use?  (For everything 
> 
> but the charging wire, that is).
> 
> Polecat


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.