273 throttle cable and linkage

[Cameron Hubling <crhubling@xxxxxxxxxxxx>]

I've put a Carter AFB on my 273 in a 65 Dart along with a 1 inch carb spacer
and of course the throttle and kick-down linkage is all out of whack.  I can
deal with the kick down modifying it etc but was wondering if anyone has
already dealt with how to change/modify/buy the throttle cable hook-up.  As
well, any suggestions with the choke?  If I don't use the spacer the choke
will work when I remove the housing from the stock 2 bbl choke.  The
manifold is a stock 65 4 barrel.

 

Thanks

 

Cameron

 


[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.