shield

[Don Dulmage <big-d@xxxxxxxxxxxx>]

 I do not use two gaskets. The thin aluminum doesnt leak . I use the normal gasket on the block , then the shield and bolt the b pump to that. the shield must shield the pump body from the block . if you would feel better a light smear of hi temp silcone on the ating surface would not go amiss but I avent had any leaks without it either. My car was almost undrivable in traffic during hot weather before installing this BTW. 
Don
Author of
Return to Deutschland (True Adventure)
Old Reliable (Mopar)
http://altonapublicschool.faithweb.com/

http://seniordragster.bravehost.com/index.html
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.