I haven't checked anything yet, but I will add that to the list. It does have washers and they're still mounted, but I guess they could have a bad seal. Thanks to all that replied. HoustonDB@xxxxxxx wrote: > > > Do you, or did you, have windshield washer nozzles? If the mount screw > for > the nozzle is not installed, there is a hole from the topside of the > cowl > into the space behind the dash. And it can easily be mistaken for a > bad > windshield, or wiper pivot seal. Water collects behind the seal at the > back of the > hood, and then eventually runs down into the interior through that > hole. > > Just something else to check....... > > Houston > '64 Belvedere > > > > ************************************** AOL now offers free email to > everyone. > Find out more about what's free from AOL at http://www.aol.com. > > [Non-text portions of this message have been removed] > Jeff Adams 64 Polara ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.