Yes, there is a "strap". If you need a photo, I think I can get one even though my car is in the trailer at the moment. '65 Coronet 500 stroker -----Original Message----- From: dgallimore@xxxxxxxxxx To: 1962to1965mopars@xxxxxxxxxx Sent: Sun, 11 Mar 2007 6:45 AM Subject: Re: 65 Coronet Fender Supports The '65 B-Body Plymouths have it. No doubt the Coronets have it too Akron Don Bill Maurits wrote: > Are 65 Coronets supposed to have a support strap that goes from the > bottom of the fender just in front of the front wheel over to the > frame? or is that part of the fender just supposed to "flap" in the > wind? It looks like there are a couple of holes in my frame just aft > of the bumper supports that could attach suck braces. > > Thanks > Bill M > 65 Coronet 500 'vert > > ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: ________________________________________________________________________ Check Out the new free AIM(R) Mail -- 2 GB of storage and industry-leading spam and email virus protection. [Non-text portions of this message have been removed] ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.