Re: 65 Coronet Fender Supports
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 65 Coronet Fender Supports



It's a round bad bar with a flat bend at each end to
bolt to the fender and frame. I might have a extra
pair from my 64 Polara if you can't locate any.
--- Bill Maurits <Y1TopBanana73@xxxxxxxxx> wrote:

> Are 65 Coronets supposed to have a support strap
> that goes from the
> bottom of the fender just in front of the front
> wheel over to the
> frame? or is that part of the fender just supposed
> to "flap" in the
> wind? It looks like there are a couple of holes in
> my frame just aft
> of the bumper supports that could attach suck
> braces.
> 
> Thanks
> Bill M
> 65 Coronet 500 'vert
> 


George




 
____________________________________________________________________________________
Need Mail bonding?
Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.
http://answers.yahoo.com/dir/?link=list&sid=396546091


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.