Bob, as far as I know there is not a direct bolt on for the 62-65 B body cars except for the factory one. From what I gather the factory bar really is not up to the task for performance handling. I have installed the kit from Firm Feel (firmfeel.com), they say you can bolt it in by drilling a few holes in the K member, I opted to weld the brackets on since I had my K member out at the time. Unfortunately my 64 Sport Fury is still not on the road so I cannot give you a before/after comparison but I am sure some of the other list members will be able to provide this infor for you, Just remember that a sway bar is not part of a hot setup for strip applications. Hope this helps. Nico Over Va. Beach, Va. 64 Sport Fury 63 Dodge 440 wagon ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.