Re: 4-spd shifter

["Ben Jr. Morgan" <polara_hotrods@xxxxxxx>]

I didn't modify my competition plus, I got a stick with a little more angle in it. The first was planting my knuckles in the blower knob every time. Now I only get a bruised knuckle if I get carried away and my hand slips off of the knob (its got the good old plain black knob).
  ----- Original Message ----- 
  From: chymar01@xxxxxxxxxxx<mailto:chymar01@xxxxxxxxxxx> 
  To: 1962to1965mopars@xxxxxxxxxx<mailto:1962to1965mopars@xxxxxxxxxx> 
  Sent: Thursday, February 22, 2007 6:39 PM
  Subject: RE: 4-spd shifter



  i had to move mine as close to the outer end as possible to adjust my shift rods in a cobbled together setup. I can't really say how much it lengthened the throw because i don't have a before point to compare to. But i had a buddy once that had a Cuda that had the dual-pattern parts on it and when he swapped holes it made quite a difference.

  mark

   -------------- Original message ----------------------
  From: ledman_70@xxxxxxxxxxx<mailto:ledman_70@xxxxxxxxxxx>
  > 
  > I used a new bit in my drill press and couldn't even mark it! How far 
  > apart did you redrill your holes? Did it shorten the shifter throw a 
  > lot?
  > 
  > chymar01@xxxxxxxxxxx<mailto:chymar01@xxxxxxxxxxx> wrote:
  > > 
  > > i had to take mine to a machine shop to have them drilled. They said 
  > > they ended up using an end mill to cut the holes. The guy said he had 
  > > never had that trouble doing GM ones.
  > > 
  > > Mark
  > > 
  > >  -------------- Original message ----------------------
  > > From: ledman_70@xxxxxxxxxxx<mailto:ledman_70@xxxxxxxxxxx>
  > > > 
  > > > I'm getting ready to buy a new Hurst box for my 64 Polara with 833 
  > > > because my current one is a little sloppy. I have a 71-74 B-body pistol 
  > > > grip shift handle on it. What I'd like to know is if anyone has ever 
  > > > redrilled the whols in the transmission arms closer together to shorten 
  > > > the shifter throw? Right now it's just short of hitting the blower 
  > > > switch and I'd like a little closer pattern, if possible. I tried to 
  > > > redrill one of the arms last year, but they're harder than diamonds. My 
  > > > other option is buying a box with longer levers on the bottom. Any of 
  > > > you guys ever had any experience doing this mod?
  > > > 
  > > > 
  > > > 
  > > > Jeff Adams
  > > > 64 Polara
  > > > 
  > > > 
  > > > ----
  > > > Please address private mail -- mail of interest to only one person -- 
  > > > directly 
  > > > to that person.  I.e., send parts/car transactions and negotiations as 
  > > > well as 
  > > > other personal messages only to the intended recipient, not to the 
  > > > Clubhouse 
  > > > public address. This practice will protect your privacy, reduce the 
  > > > total volume 
  > > > of mail and fine tune the content signal to Mopar topic.  Thanks!
  > > > 
  > > > '62 to '65 Mopar Clubhouse Discussion Guidelines:
  > > > http://www.1962to1965mopar.ornocar.org/mletiq.html<http://www.1962to1965mopar.ornocar.org/mletiq.html>. 
  > > > 
  > > 
  > 
  > 
  > 
  > Jeff Adams
  > 64 Polara
  > 
  > 
  > ----
  > Please address private mail -- mail of interest to only one person -- directly 
  > to that person.  I.e., send parts/car transactions and negotiations as well as 
  > other personal messages only to the intended recipient, not to the Clubhouse 
  > public address. This practice will protect your privacy, reduce the total volume 
  > of mail and fine tune the content signal to Mopar topic.  Thanks!
  > 
  > '62 to '65 Mopar Clubhouse Discussion Guidelines:
  > http://www.1962to1965mopar.ornocar.org/mletiq.html<http://www.1962to1965mopar.ornocar.org/mletiq.html>. 
  > 


  ----
  Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

  '62 to '65 Mopar Clubhouse Discussion Guidelines:
  http://www.1962to1965mopar.ornocar.org/mletiq.html<http://www.1962to1965mopar.ornocar.org/mletiq.html>. 



[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.