Jim, Just like Dustin and Jeff said, you can take the centers from your wheels and have some people build whatever you want. Summit carries the SBP steelies in 14" and 15". If I were doing it, I would go with 15" (or even 16") only to get a better selection in tires. 14" tires are getting hard to find with much selection. There are several companies that will weld up your new wheels with whatever offset and width you desire, but I would caution you to take their advice on wheels--a friend had stockton decide on the backspacing for some rear wheels he had made up, and they did something like 5.25", which of course ran into his springs. Not to mention they looked silly as they were only 7" wide, and went way inside his wheel wells on his 65 cuda. Of course, you have to qualify all of the above being that I did this to my car =) http://tinyurl.com/ybs5qd MJ ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html.
This email was sent to: arc.6265@xxxxxxxxxxxxxxhttp:///u/?.. Or send an email to: 1962to1965mopars-unsubscribe@
http:///?p=