Re: Manifold/header comparisons PART of the answer
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Manifold/header comparisons PART of the answer




 
In a message dated 1/21/2007 10:26:02 PM Central Standard Time,  
pngkid@xxxxxxxxxxxxx writes:

440 with  iron manifolds @ 5400 RPM 422.2 Hpower
440 with shorties @ 5400 RPM 478.8  Hpower
440 with Elite Full Length @4=5400 RPM 492.3  Hpower


Like I stated in the beginning,,,,,,,,,,,,,,,from what I have  heard, the MW 
manifolds may flow a little bit better than the stock cast iron  manifolds, 
and I am definitly into the WOW but,,,,,,,,,,,,,,,,,to leave 70 HP  laying on 
the table, and having to pay more to end up with less just does not  get it

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

http:///u/?.. 
Or send an email to: 1962to1965mopars-unsubscribe@


http:///?p=





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.