tool query

[Robert neal zimmerman <northwestweirdo@xxxxxxxxxxx>]

I am seeking ponters for some sort of a tool to cut a hole through
sheetmetal.  I found out that trunk extensions for my 67 cuda arent
available so I have had to make a pair myself,  and i might add they
look darn good and fit perfect.
   BUT, heres the problem, I want to restore the little hole in themn
   for the drain plugs.  They are out of the car and on the workbench so
   acess is not a problem but short of buying some dremel mini coping
   saw, what can i do. I really dont feel like spending another 100
   bucks on a tool i will use once.
  any body ever dealt with this before??  the hole is round except for
  the last  fifth of it , where it  flattens off and then theres a
  little "blip" in the flat part for the actual drain port.  
  Is there some other type of plug i could use that is just round so i
  could use a hole saw,  or is the drain even very necessary, seems they
  dont help much anyway, lest why would our cars always be rotted
  there??
  neal zimmerman, eugene oregon

-- 
http://www.fastmail.fm - Choose from over 50 domains or use your own


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

. 



http://www/?p=