Re: post 65 rear ends

[Doug Ahern <D170A833@xxxxxxxxxxxxxxxxxxx>]

On 05 12/03/06, Paul Lennemann wrote:
> I have a line on a guy who has several 65 & newer rear ends.  I haven't 
> talked to him yet so I don't know exactly what he has.  But here's my 
> question, I have a 742 Sure Grip 3rd member that I want to be able to 
> use.  Do all of the axles have the same splines so that I would be able 
> to use it with a newer rear?  Anything else I need to know when I go 
> "shopping"?

make sure the axles you get match the housing (i.e. 1965 axles with a
1965 housing.,..)  because diff housing widths changed slightly 65-70,
nearly each year, so axles lengths change accordingly.  I got these
widths from factory parts manuals or my own measurements (for which, I
didn't take accuracy lightly.,..)   width of bare housing,, flange to
flange..:

1966-67 54.25" 
1965    54.50" 
1970    54.9062"
1968-69 54.9375"

from http://www.autohobbydigest.com/8_75.html

also, be sure   you don't end up with a truck/van rearend,,.
spring perches are on the tops of those units,, not the bottoms
like passenger cars.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@