Re: 273 disaster

[Dodger7998@xxxxxxx]

consider using about 8-9 inches of hose on the rod bolts, and  using the 
flexibility of the hose to get the rods started into place, with the  hose on 
there, it will not hurt to gently set the crank on the hoses to allow  the turning 
of the crank to get the rods properly  positioned

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@