RE: Engine RPM at highway speed
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Engine RPM at highway speed



Sean,
I just went out and checked the portable tach I used to check each car 
and it was set on 8 cylinders.  Tonight I bought a new Sun Pro tach and 
temporarily installed it in the Charger.  It's the same tach that I put 
in the Belvedere.  I'll drive the Charger tomorrow to see how the 2 
tachs compare (Sun Pro & Tic-Tock-Tach) and get back to you with the 
results.


Sean B wrote:
> 
> Brian, this may sound dumb, but is one of your tachs set for a six 
> cylinder?  I've done that before.
> 
> Sean
> 
> 
> Brian Schlump wrote:
> > 
> It tachs at 2,200 rpm at 62 
> > mph.  
>   It tachs at 3,300 rpm at 
> > 62 mph.



'64 Belvedere
Woodstock, IL.

"The difference between ordinary and extraordinary is that little 
extra."


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@







Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.