Re: Tubbing Question

[MrChristopher1@xxxxxxxxxxx]

Hey, let me get home tonight and I can send you some pictures.  I have already halfed my wheel wells and they came out GREAT!  As for the rear seat mounts (mine is a '64 B body), I cut the wheel well on the inside (toward center of car) of the mount so it remains in it's stock location.  I also managed to keep the mounts that hold the wiring harness in the stock location (driver side).
Christopher

--
'64 Dodge 440 2 Dr. Hard Top 
'87 Dodge Ramcharger 
'00 Merc Berz C230 Kompressor (Hey, It's DaimlerChrysler)

 Now I have to cut the wheel housings in half and move them in also. Most everything seems straight forward, BUT, what will I have to do to mount the rear seat again? Will I have to modify the seat frame? 
> 
> '65 Coronet 500 stroker 
> 
--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@