Re: painting exhaust manifolds

[Derrick Brown <derrickb@xxxxxxxxxxxxxxxxxxx>]

hi neal,

i used the eastwood cast iron color manifold paint on my MW manifolds.
they recommended two coats.  i put one coat on cause i thought it was  
getting a bit too thick.

im not that pleased with how they came out (3 months down the road now).
they are discoloring.
ill take them off and redo this winter as they directed (two coats.)

as for high temp powder coat, i didnt think even hi temp was high  
enough for exhaust manifolds)


On Oct 22, 2006, at 2:36 PM, Robert neal zimmerman wrote:

> anybody had any luck with any of the hi-temp coatings for exhaust
> manifolds??  I have heard mixed reviews.one guy i know used the  
> eastwood
> stuff to the letter and it failed within a few months
>   neal zimmerman, eugene oregon

Derrick Brown
'63 Plymouth Sport Fury, 426MW, 4 Speed
Derrickb@xxxxxxxxxxxxxxxxxxx




--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@