Dooner i am glad you brought this up. NO your engine does not rev up to the rated RPM before the car moves. . The only time that would be possible is with a trans brake and you foot almost in the oil pan. You have brought to light the common misconception people have about converters . Thank you. Cheap converters (10 inch and larger with stall)are slippery but even they dont have to reach rated stall to move the car. Dynamic 9 1/2 as Bill mentioned drives like a stock converter. You can not tell it isnt. and yet it will allow the big cam engine to idle without breaking everything insite . It will pull away like a stocker BUT, If you Brake it and load it up when you relase it you may get a nose bleed. Really guys we are not dreaming. they really are that good. Don Author of Return to Deutschland (True Adventure) Old Reliable (Mopar) http://stores.ebay.ca/Don-Dulmage-Enterprises http://seniordragster.bravehost.com/index.html [Non-text portions of this message have been removed] ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. This email was sent to: arc.6265@xxxxxxxxxxxxxx bSONJP. Or send an email to: 1962to1965mopars-unsubscribe@