RE: Pitman arm

[george smith <bt6t4@xxxxxxxxx>]

I had that proble also,even w/ my 1 st 64 Polara back
in the day. I used Locktite when I put the new box on.

--- Brian Schlump <jsbs@xxxxxxxxxxxxx> wrote:

> 
> That's a good point Rich.  My bolts loosened one
> time, and my buddy's 
> '69 Super Bee had the same thing happen.  We each
> used Loctite on the 
> threads, and haven't had them loosen up again.
> 
> 
> Richard Kinsley wrote:
> > 
> > 
> > Brian Schlump wrote:
> > > 
> > > The steering is feeling a little loose in my '64
> Belvedere.  Tonight I 
> > > had my wife move the steering wheel left and
> right,and I can feel up and 
> > > 
> > > 
> > > down movement in the ball socket that attaches
> to the relay rod.  
> > > Everything else feels tight.  I think I should
> replace the pitman arm.  
> > > If you guys agree, where is the best place for
> me to buy one?
> > > Brian
> >
>
---------------------------------------------------------------------
> > 
> > I got mine from Just Suspension. Be sure to check
> everything. Mine was 
> > sooooo loose. The steering box bolts were so loose
> I could turn them in 
> > many turns by hand! It was miraculous how much
> better it handled and 
> > stopped after my suspension upgrade.
> > 
> > 
> > Rich Kinsley  '64 Polara 4 dr 318poly w/goodies
> 
> 
> 
> '64 Belvedere
> Woodstock, IL.
> 
> "The difference between ordinary and extraordinary
> is that little 
> extra."
> 
> 
> ----
> Please address private mail -- mail of interest to
> only one person -- directly to that person.  I.e.,
> send parts/car transactions and negotiations as well
> as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This
> practice will protect your privacy, reduce the total
> volume of mail and fine tune the content signal to
> Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
>
> 
> 


George


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@