RE: max wedge exhaust vs headers

[Dave Mutchler <DMUTCHLER@xxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
FREE DVR
And up to 3 additional standard receivers!
Call 1-800- 901 - 5080 Today
caaeas1bOyW3Na/DirectSatTV
-------------------------------------------------------------------


bigroberta@xxxxxxx wrote:
> 
> 
>  
>  Friends,
>  
> I just installed a master power brakes man/disc conversion pkg on my 63 
> spt fury conv. I
>  
> am very concerned about the 1 in clearance between the master cylinder 
> and the max wedge
>  
> exhaust manifold. The car has a modified krammers automotive heat shield 
> that works/looks okay.
>  
> I checked the exhaust manifold and master temps with a thermal heat gun. 
> Manifoild = 650
>  
> master = 150.  The outside temp was 45 deg.  My engine stuff. 440 ,10.5 
> comp, 600 solid, 6pak. 4.10
>  
> gears , stage 5 iron heads.
>  
> question ?
>  
> Would headers lower my engine compartment temps?     { the engine does 
> not run lean]
>  
> Robert
> in Maryland  
> 
> [Non-text portions of this message have been removed]
> 
Headers will definitely raise the temp under the hood. There are 
coatings and wraps that help but I don't know if they will get it down 
to manifold temps.

[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caaedmqbOyW3Nf/PC PowerScan
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.