[AD removed for archives] ------------------------------------------------------------------- Oprah vs Dr. Phil- who is your favorite? Vote now. caaeatsbOyW3Na/Your opinion ------------------------------------------------------------------- 11" bellhousing from a 69 Charger. Casting number ends in 2626. This is for an 11" clutch, 143 tooth flywheel. OE on HP 440 car. Will work for hemi and 383 with correct flywheel. Hard item to come across, most are 10.5". This uses a slightly larger clutch diameter. I do believe that the 426 hemi's had a different casting number, but used a 143 tooth flywheel. Some hemi's used a direct drive starter as well, but I believe that set up used yet another bellhousing. This isnt an OE 426 hemi bellhousing, but if you dont have the OEM unit, this will work with the 143 tooth 8 bolt flywheel No cracks welds, or stripped threads. Unit has been cleaned, shot blasted, primed and painted. Email me off list for pics/price at ntoleranse@xxxxxxxxx Will trade for BB mopar scattershield w/block plate. Doc. [AD removed for archives] ------------------------------------------------------------------- Is your computer freezing up or slowing down? Repair corrupt files and harmful errors - protect your PC Take a 2-minute PC health check-up at no charge! caaeatrbOyW3Nf/PC PowerScan ------------------------------------------------------------------- ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. bOyW3N.