[AD removed for archives] ------------------------------------------------------------------- Oprah vs Dr. Phil- who is your favorite? Vote now. caad6r9bOyW3Na/Your opinion ------------------------------------------------------------------- You can buy pistons that go up to .080 over for the 413. They are made by Egge machine works. This will take you well past the 426. Alex Dodger7998@xxxxxxx wrote: > > > > In a message dated 10/22/2005 10:52:24 AM Central Standard Time, > MOPAR413@xxxxxxx writes: > > Can the 413 be bored out to 426 > > > 413 is 4.18,,,,,,,,,,,,426 is 4.25,,,,,,,,,,,difference being .070, > should > go as I have heard of 413 being used with 440 pistons which would be > 4.32 > bore, or a .140 over bore, not sure at what point sonic testing should > be done, > but would probably be a good idea after .060 > dodger > > [Non-text portions of this message have been removed] > [AD removed for archives] ------------------------------------------------------------------- So Much Television, Such Little Time! In Love with Lost(TM) or Devoted to Desperate Housewives(TM)? Take our premier week survey, complete our offers, and get a FREE* DVD set of either show! caad3QabOyW3Nf/Viewer Survey ------------------------------------------------------------------- ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. bOyW3N.