[AD removed for archives] ------------------------------------------------------------------- Technology Made Easy so you can Enjoy Your Technology! Help with PCs, iPods, network & much more. Industry Leader. caad3QVbOyW3Na/LightFrog ------------------------------------------------------------------- On 00 10/18/05, Joeydahook9@xxxxxxx wrote: > I have a Big Block pan with the indentation on one side that I'm told was > put there by the factory for use in A body 383 cars. Is this correct? and > can it be used with early c/b bodies? the A-body 383 pans were stamped "893". Go to the clubhouse tech page and look for the oil pan notes. see if what you have is similar to the "187" / "699" pans. The 65-65 C-body pan was not stamped with a number but it is identical to a "187" pan. the later "699" pan is identical to a "187" pan as well. they have an indentation on the passenger sidei. Also, there are some pictures at: http://www.autohobbydigest.com/pans.html [AD removed for archives] ------------------------------------------------------------------- Take our Nationwide Ice Cream Survey today! Receive a FREE* $100 Restaurant Gift Card of your choice or $100 worth of Ben & Jerry?s® or Häagen-Dazs® ice cream for participating! caad3P6bOyW3Nf/Ice Cream Research Survey ------------------------------------------------------------------- ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. bOyW3N.