RE: Piston source?

[Dave Mutchler <DMUTCHLER@xxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Did president Bush react quickly enough to hurricane Katrina?
caad0PSbOyW3Na/Nationwide Survey
-------------------------------------------------------------------


Gary H. wrote:
> 
> I got an e-mail asking about piston sources. (See below).
> Anyone help? 
> 
> Thanks,
> Gary H. 
> 
> 
> "Do you know anyone who supplies, or anyone who may have had cause to 
> source replacement pistons for a 426 wedge with a 0.030" rebore? We have 
> 
> 1 cylinder bore in the block that is out-of-round, so rather than 
> sleeving that 1 bore we plan to have a minimum rebore of 0.030".
> I wouldn't have thought this was such an unusual scenario, a 40+ year 
> old engine needing a rebore? We're trying to find a manufacturer that 
> has forged pistons of this spec in their product range but have so far 
> drawn a blank."

The only other info I have on EGGE machine co. is this phone 
number:866-534-3443. I talked to Danny. I hope this helps.
Dave

[AD removed for archives]
-------------------------------------------------------------------
Buying or Selling a Home? Get the Facts Before Buying or Selling! 
Get a FREE Home Valuation TODAY!
caadV2pbOyW3Nf/Home Valuation 
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.