RE: Piston source?

[Jim Jablonski <jim@xxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Ben & Jerry?s® or Häagen-Dazs®?
Take our Nationwide Ice Cream Survey today! Receive a FREE* $100 
Restaurant Gift Card of your choice or $100 worth of Ben & 
Jerry?s® or Häagen-Dazs® ice cream for participating!
caadVYQbOyW3Na/Ice Cream Research Survey
-------------------------------------------------------------------

Gary,

I've never called these guys, but the Flatlander Racing "online catalog" 
shows the following listing:

99590  CHRYSLER  426W  1963-1964  $720

http://www.flatlanderracing.com/

Don't know if they can accomodate the .030 over bore, and it doesn't 
look "stock," but it's a place to start (?)

Regards,

Jim Jablonski
Royal Oak, Michigan
'64 Fury



Gary H. wrote:
> 
> I got an e-mail asking about piston sources. (See below).
> Anyone help? 
> 
> Thanks,
> Gary H. 
> 
> 
> "Do you know anyone who supplies, or anyone who may have had cause to 
> source replacement pistons for a 426 wedge with a 0.030" rebore? We have 
> 
> 1 cylinder bore in the block that is out-of-round, so rather than 
> sleeving that 1 bore we plan to have a minimum rebore of 0.030".
> I wouldn't have thought this was such an unusual scenario, a 40+ year 
> old engine needing a rebore? We're trying to find a manufacturer that 
> has forged pistons of this spec in their product range but have so far 
> drawn a blank."

[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caadVJEbOyW3Nf/PC PowerScan
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.