[AD removed for archives] ------------------------------------------------------------------- Ben & Jerry?s® or Häagen-Dazs®? Take our Nationwide Ice Cream Survey today! Receive a FREE* $100 Restaurant Gift Card of your choice or $100 worth of Ben & Jerry?s® or Häagen-Dazs® ice cream for participating! caadVYQbOyW3Na/Ice Cream Research Survey ------------------------------------------------------------------- Thanks Gary, and now the hunt continues for NOS parts. I can attest to your other point @ the other models as I removed the trim from a Belevedere and they are a hex type nut and have to be removed from the inside. I suppose I could do the same with mine but am reluctant to remove the headliner until I'm ready to replace it. Not having done this before I'm not sure how tricky it would be to r&r that portion of the 40 year old headliner without making it worse. The car will also be repainted at some time in the future and that would be a good time to do the whole operation as the trim could be removed before painting and the headliner could then be replaced at the same time. I'm just a little on the impatient side and the maddening thing to me about the whole thing is that there is only one of the six trim pieces that won't hold in place. Gary H. wrote: > > Each louver trim piece has a different PN and the trim package calls for > > 12 washers and 12 *clips* -- not nuts. > > Washer = 6022 013 > Clip = 6000 808 > > Interestingly, the trim pieces on the other '63 Plymouths *do* use nuts > to attach the ornamental trim piece placed between the rear window & > side window quarter outside panel. > > Gary H. > > > Paul Lennemann wrote: > > > > > > O.K. here's a question for someone with a parts book for a 63 plymouth. > > > > > > On the Sport Fury there are three chrome trim pieces on the 'C' pillar. > > > > > > These are held in place by tubular speed nuts. I have purchased both > > sizes that Restoration Parts sells and Gary Goers catalog doesn't give > > much info on the ones he has. The problem w/ the ones I've purchased > > are that they are too small o.d. to hang in the hole in the sheet metal. > > > > > > They need to anchor in a hole w/ a diameter of @ 11/32" while the i.d. > > to fit the stud on the trim piece is 1/8". So what I'd like to try next > > > > > > is to get the actual part # and see if I can find some NOS parts. > > TIA > > Plyguy > > '63 Sport Fury > > 440/727 Plyguy '63 Sport Fury 440/727 [AD removed for archives] ------------------------------------------------------------------- Need Emergency Cash? Get Up To $500 Now! No Credit Checks, Easy & Fast Approval Cash in you account Overnight! caadVJ4bOyW3Nf/911PaydayAdvance ------------------------------------------------------------------- ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. bOyW3N.