Re: Vendor II

[Jimmy Peavy <peaver63@xxxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Buying or Selling a Home? Get the Facts Before Buying or Selling! 
Get a FREE Home Valuation TODAY!
caadV2pbOyW3Na/Home Valuation 
-------------------------------------------------------------------

I've used the same stuff, cut from sheets of packing.
It takes alot of time, but you can make them, if you have the material..
Punch the holes first, then cut the ID's and the OD's.

   Jimmy

george smith wrote:

> I'm looking for a vendor for the thin foam gasket
> between the taillight valance and body for my Polara.
> Any ideas,comments,suggestions?
> Thanks,
>
> George
>
>
>  

[AD removed for archives]
-------------------------------------------------------------------
Erase wrinkles without painful injections with Nexiderm SP.
Nexiderm SP is clinically proven to reduce wrinkles by 68% Click 
here to get your 30-day free supply.
caadVJYbOyW3Nf/Nexiderm
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


bOyW3N.