Re: Big oil pan blues..
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Big oil pan blues..



[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caadOuabOyW3Na/PC PowerScan
-------------------------------------------------------------------

I have spoken with two other people (65 coronets) who had no problems with the milidon pan either. I hope I don't, because that is what I have already mounted up. I had zero problems with the windage tray either. And yes, I rotated the crank to check all clearance issues...

Jason

On 8/22/2005 7:33 AM, tom hecht wrote:

first, let me be clear, i don't care which pan anybody
uses!
but, if you "have" to notch the k-frame for the
milodon 010,
then i would be checking your motor mounts.
on my 65 plymouth the pan fit just fine, as previously
mentioned, i "notched" the k-frame only as a
precaution.
the "notch" is less than the size of the end of my
little finger.

tom
65 satellite


--- Jim500mopar@xxxxxxxxxxxxx wrote:





I ended up ordering and recieving both pans in an
effort to solve this, saw how how both did/didn't fit on the car, no guesswork
here.


Ordered first the Milodon pan, REQUIRED NOTCHING.

Then got Moroso pan, my '65 Coronet 500 accepted the
Moroso pan with NO notching.


The Milodon pan a thing of beauty, but would have
required notching.








____________________________________________________
Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs







[Non-text portions of this message have been removed]


[AD removed for archives]
-------------------------------------------------------------------
Get up to $1500.00 Fast and Easy!
No Credit Checks! No Paper Hassles! Nothing To Fax!
Apply Online and We'll Contact You Within the Hour!
caadOuobOyW3Nf/911PaydayAdvance
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


bOyW3N.






Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.