RE: 65 Belvedere wipers and motor?

[Kevin Merkley <krmerkley@xxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Erase wrinkles without Botox! Nexiderm SP is clinically proven to 
reduce wrinkles by 68% Click here to get your 30-day free supply.
caadOvzbOyW3Na/Nexiderm
-------------------------------------------------------------------

CORRECTION:

After hitting send I realized that the wiper pivots from a 63 are 
actually shorter than the 64 units.  

I had great hopes when I got a wiper set from a 63 Plymouth that they 
would replace the seized wiper pivot for my 64 440 but, alas,  it was 
not to be.

Once again it was Doug Baker that bailed me out of that situation.

Regards,

K.

Kevin Merkley wrote:
> 
> The 62-64 wiper arms screw onto the wiper pivots.
> 
> The pivot lengths also changed from 62-63 to 64-65.  The cowls for the 
> 62 and 63 are curved upward and therefore the pivots are longer.
> 
> K.
> 
> Akron Don wrote:
> > 
> > The correct '65 wiper arm is pushed onto the pivot, not bolted. Make 
> > sure the little tab under the wiper arm pivot is under the linkage pivot 
> > 
> > 
> > heads or you may find yourself in a torrential rainfall and not be able 
> > to see - been there and done that and it ain't no fun. I don't think the 
> > 
> > 
> > parts stores will have the arms, just the blades and blade holders.
> > 
> >     Akron Don
> > 
> > Jim Altemose wrote:
> > 
> > >Thanks all for the wiper info.  I got a motor and linkage with pivots
> > >from Scott M. on this board.  I also got from Scott a wiper arm
> > >labeled 64 Fury that has a small threaded connector hole to attach to
> > >the pivot.  The pivots have a larger fitting than the arm.  To
> > >describe the size, a 5/8 socket just fits over them; a 9/16 won't fit
> > >over them.  Are these correct for a 65 Belvedere (I'm not real
> > >concerned if they're not; just curious)?  Does anyone have an arm or
> > >arms that would fit this larger fitting?  Is that a standard arm I
> > >could get from the dealer or parts store?  Thanks.
> > >
> > >- Jim
> > >Jim Altemose, Long Island, NY
> > >'63 Polara 500 (Max Wedge), '65 Belvedere I (Street Wedge), '71 Bronco
> > >
> > >  
> > >
> > 
> > 
> 
> 
> 
> Kevin R. Merkley
> Thunder Bay, Ontario
> 64 Dodge 440 2dr HT (Cdn)



Kevin R. Merkley
Thunder Bay, Ontario
64 Dodge 440 2dr HT (Cdn)

[AD removed for archives]
-------------------------------------------------------------------
Ben & Jerry?s® or Häagen-Dazs®?
Take our Nationwide Ice Cream Survey today! Receive a FREE* $100 
Restaurant Gift Card of your choice or $100 worth of Ben & 
Jerry?s® or Häagen-Dazs® ice cream for participating!
caadOvZbOyW3Nf/Ice Cream Research Survey
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.