RE: Wheel Stud Help

[ledman_70@xxxxxxxxxxx]

[AD removed for archives]
-------------------------------------------------------------------
Need Emergency Cash? Get Up To $500 Now! 
No Credit Checks, Easy & Fast Approval 
Cash in you account Overnight!
caadFXWbOyW3Na/911PaydayAdvance
-------------------------------------------------------------------

I got mine at Auto Zone, but I changed them over to all right hand 
thread...sorry, no part number, I just took one off the right side of 
the car and matched it up.
Nick Tiberio wrote:
> 
> Does anyone know a NAPA or other national parts store, Part Number for 
> rear axle wheel studs. 3 sets of studs that from NAPA are still too 
> small. Their computer does not list anything for a 1963 Plymouth. The 
> car is using a 8/34 stock axle, 10" x 2 1/2" brake.
> 
> When pressing out the rear hub from the drum it bent the old drum. The 
> hub with the old studs will not work in the new drum. Studs had to be 
> ground down then pressed out. This item has to be out there.
> 
> Thanks, 
> Nick Tiberio
> 63 Fury



Jeff Adams
64 Polara

[AD removed for archives]
-------------------------------------------------------------------
Get a Free T-Mobile Sidekick II plus $500 towards service! 
Click here.
caadGKUbOyW3Nf/ProductTestPanel
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.