RE: LA 318 crank in a 340

[wmp4@xxxxxxxxxxxxxxxxxxx]

[AD removed for archives]
-------------------------------------------------------------------
Erase wrinkles without painful injections with Nexiderm SP.
Nexiderm SP is clinically proven to reduce wrinkles by 68% Click 
here to get your 30-day free supply.
caadAclbOyW3Na/Nexiderm
-------------------------------------------------------------------

William Paxton
wmp4@xxxxxxx



                                        You will only get 408 out of the 
360, where as you will pick up 8 more cubes with the 340.
                                        The early LA 318? The first year 
was 1967.






Earl Helm <earlh@xxxxxxxxxxxxxx> 
06/02/2005 12:11 PM
Please respond to
1962to1965mopars@xxxxxxxxxx


To
1962to1965mopars@xxxxxxxxxx
cc

Subject
RE: LA 318 crank in a 340






[AD removed for archives]
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
caadAcrbOMgnMa/ProductTestPanel
-------------------------------------------------------------------

Neal,

I may be wrong, but it is my understanding that the only Forged
cranks in the early LA318's came in truck motors. I think the
last year was 1967. It is easy to
tell the difference looking at the front balancer. If it is a forged
crank the balancer will be skinny, and if is a cast crank, it will
be thick. Just like the 440 stuff. But either way it should work
just fine, as long as you use the right balancer and torque
converter. Why don't you just buy a cast stroker crank and
get with the program. If it is going to be a street car with
a small block, you don't really need a forged crank. The cast
strokers can be had for about 300.00. The next piece of
advice is to sell your 340 block to one of the resto guys, who
think they are kool, and build a 360 stroker. It will kick butt
on any 340 you will build.

Earl


this is an LA 318 crank, not a Poly 318 crank I am wondering about. I know
its forged by the skinny balancer and i have heard tell the early 273s and
318s (LA) before 68 were all forged.
  Anybody else know if this will work in a 340 for a cheap way to a
  steel crank?????? 
   Neal Zimmerman, Eugene oregon

--
http://www.fastmail.fm - Same, same, but different.

[AD removed for archives]
-------------------------------------------------------------------
Erase wrinkles without painful injections with Nexiderm SP.
Nexiderm SP is clinically proven to reduce wrinkles by 68% Click here to 
get
your 30-day free supply.
caadAclbV1hOjf/Nexiderm
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and 
negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

[AD removed for archives]
-------------------------------------------------------------------
Get a Free T-Mobile Sidekick II plus $500 towards service! 
Click here.
caadAcqbOMgnMf/ProductTestPanel
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- 
directly to that person.  I.e., send parts/car transactions and 
negotiations as well as other personal messages only to the intended 
recipient, not to the Clubhouse public address. This practice will protect 
your privacy, reduce the total volume of mail and fine tune the content 
signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 






--
[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Need a new washer and dryer set? You could get one free!
caadzTWbOyW3Nf/ProductTestPanel
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.