[AD removed for archives] ------------------------------------------------------------------- Take movies and games anywhere with a Free Playstation Portable! caadwPbbOyW3Na/ProductTestPanel ------------------------------------------------------------------- On Sun, 29 May 2005 16:35:53 -0400 John Goodman <regsec@xxxxxxxx> writes: > > It tried to start a couple of times, backfired, once, and that was > it. > Pulled the terminal from the top of the distributor and spark is > fine. > (Car has mopar electronics distributor and MSD 6AL ignition box). > Checked spark at #1 plug and Nada, none, zilch. I'm thinking the > rotor > or cap, but both look brand new. If you are getting spark at the coil wire going into the cap, then your pick-up should be working. I don't think that a chip in the reluctor will matter. It sounds like you aren't getting spark at the right place, at the right time. Check the gap, like Gary Bradshaw suggested, but put the eye on where the rotor is at top dead center, and see if the #1 plug hole in the cap lines up. Tom in Dallas [AD removed for archives] ------------------------------------------------------------------- Buy Stocks and Index Funds for just $4 No Account or Investment Minimums and No Inactivity Fees Automatically invest weekly or monthly and build your future. caadtaKbOyW3Nf/Sharebuilder ------------------------------------------------------------------- ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. bOyW3N.