Re: 1965 Barracuda 4 speed

[Brent Stewart <prebee65@xxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Get a Free T-Mobile Sidekick II plus $500 towards service! 
Click here.
caaduFNbOyW3Na/ProductTestPanel
-------------------------------------------------------------------

the factory assembly was balanced on the torqueconvertor. the B&M flex plate 
is a quick fix that allows you to use any convertor. another fix is to have 
the engine internally ballanced and get rid of the balance weights all 
together.

> From: Robert neal zimmerman <northwestweirdo@xxxxxxxxxxx>
> Reply-To: 1962to1965mopars@xxxxxxxxxx
> To: 1962to1965mopars@xxxxxxxxxx
> Subject: Re: 1965 Barracuda 4 speed
> Date: Wed, 25 May 2005 06:56:26 -0700
>
> [AD removed for archives]
> -------------------------------------------------------------------
> Get a Free Sirius Satellite Package, don't pass on this!
> caadwPhbWhUHTa/ProductTestPanel
> -------------------------------------------------------------------
>
>
> ok i am willing to eat my words on the  balancing info i put out, i
> always thought those chunks i have seen on convertors were for this, so
> the balance is done in the flexplate???
>    I am especially intersted in this thread because I have to work the
>    opposite direction, i have to take a  360  sb 727 & convertor and
>    make it work with a steel crank 340, so what do i need to find?? Does
>    B&M have the  right flexplate for that??
>   neal Zimmerman, Eugene oregon
>
> [AD removed for archives]
> -------------------------------------------------------------------
> Erase wrinkles without painful injections with Nexiderm SP.
> Nexiderm SP is clinically proven to reduce wrinkles by 68% Click
> here to get your 30-day free supply.
> caadvf5bWhUHTf/Nexiderm
> -------------------------------------------------------------------
>
> ----
> Please address private mail -- mail of interest to only one person -- 
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.

[AD removed for archives]
-------------------------------------------------------------------
Need a new washer and dryer set? You could get one free!
caadtaGbOyW3Nf/ProductTestPanel
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


bOyW3N.