RE: Fwd: SWAY BAR

[Brent Stewart <prebee65@xxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Help us support US Troops ? Just Register Here.
caadtaMbOyW3Na/Permission Data
-------------------------------------------------------------------

i got the universal lower brackets off this weekend as they wouldn't work 
because of the sway bar hitting the strut rods. i made a set of L brackets 
out of heavy 3" angle iron and bolted it to the lower control arm with an 
longer bolt through the lower shock hole. bolted it up and tested it 
yeaterday. WOW what a differance in cornering. I should have done this long 
ago. the only problem i had was when drilling holes into the K-frame, the 
last hole i was drilling was giving me some trouble and i was pushing real 
hard and it went through the K-frame and quickly located the lower rad hose. 
with fluid flowing all over me and my drill and down the driveway. i tossed 
the drill and got a bucket real quick and saved the environment from further 
torture. got it all back together (new hose and all) and started cornering 
and cornering like a dream. Thanks for all your help. I'm going to keep an 
eye on the brackets till I'm sure they are safe and functioning properly. 
Now for a rear sway bar!!!

[AD removed for archives]
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
caadtaFbOyW3Nf/ProductTestPanel
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


bOyW3N.