RE: perforated side of ex manifold gasket
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: perforated side of ex manifold gasket



[AD removed for archives]
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
caadeMjbOyW3Na/ProductTestPanel
-------------------------------------------------------------------

i have always used a copper gasket, but put silicone on the header side.
since the heads are flat, the headers on the other hand can be
very warped.
the only reason, i have put the gasket on at all, is to make the removal less
messy.
 
i would sure be interested in hearing about that dynomax installation.
 
tom
65 satellite

ledman_70@xxxxxxxxxxx wrote:

No gaskets with headers??? Should I leave the gaskets out next week when 
I install the new Dynomax coated headers?
Jeff
Warhorse65Hemi@xxxxxxx wrote:
> 
> 
> Like Don says I also never use gaskets only the copper silicone with 
> steel 
> headers or cast iron 
> 
> Wayne 
> S/ST1633
> 
> [Non-text portions of this message have been removed]
> 



Jeff Adams
64 Polara

[AD removed for archives]
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
caadeMjbOgXg2f/ProductTestPanel
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



		
---------------------------------
Do you Yahoo!?
 Yahoo! Mail - Find what you need with new enhanced search. Learn more.
--
[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Sign up today for a No Annual Fee Discover® Platinum Card and get?
0% Intro APR on Purchases & Balance Transfers for 8 Months, Up to 
2% Cashback Bonus® reward on your purchases & 100% fraud 
protection.
caadfzUbOyW3Nf/DiscoverCard
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.









Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.