maximum centrifugal advance on a Poly engine?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

maximum centrifugal advance on a Poly engine?



 I am reposting this question from the "65 B-body motor swaps/ Trannies" thread and zeroing in on a Poly question so it 
is not missed. That's a good question and there are at least two Poly gurus subscribed who may know the answer. 
Others too! :)
 
Thanks,
Gary H.
62-65 Admin. 
 
>  May I chime in here...
>  What are the general ideas about maximum centrifugal advance on a
>  poly?
>  Usually I hear about 34° max, but 'everyone' is using a wedge chamber
>  (LA or B), I suppose the poly chamber is designed to burn with one
>  flame front and theoretically could burn up the whole cylinder filling
>  faster than if the flame front would need a reflection or two. Does
>  this result in potential for a higher maximum centrifugal advance? Or
>  ist this just a dream coefficient that won't have any real world
>  effect?
>  What are the maximum advances you are using in your polys?
>  
>  Best regards,
>  Thomas 

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/20220517002733.10495.qmail%40server309.com.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.