Re: Master brake cylinder for front/rear disc brakes

[<62-65-mail-list-club@xxxxxxxxxxx>]

That sounds good Butch. Should work great. 

By the way, did they mention needing these? I don't know if you do or not. 

 Combination Valve part number VL3360K

Adjustable Push Rod part number PR4722K

Thanks,
Gary H. 

>  -------Original Message-------
>  From: Butch Edison  
>  
>  Here is what Master Power Brakes recommended and is sending me. Looks
>  like a basic MC you'd use anywhere.
>  
>  On Wed, Mar 16, 2022, 9:32 AM < >
>  wrote:
>  
>  > OH. As you have a disc brake kit already Butch, yes, then go with
>  > whatever MC the source of the kit recommends.
>  >
>  > You don't need to read the Mopar Action article I referenced. :)
>  >
>  > Thanks,
>  > Gary H/.
>  >
>  >> -------Original Message-------
>  >
>  >>
>  >> Butch, in my view you should place a call to MP. Sure, there’s
>  > a ton
>  >> of data out there regarding what master cylinder(s) to use when
>  >> you’ve swapped later model front disc brakes onto our cars, but
>  >> given you’ve installed an aftermarket kit – particularly the
>  > rear
>  >> disc brake setup – they would have the best knowledge to spec a
>  >> master cylinder. For example, when I added the Strange rear disc
>  >> brakes to my Fury they were very specific about the master
>  > cylinder
>  >> piston bore required for proper braking.
>  >>
>  >> Jim
>  >>
>  >
>  >>
>  >> I'll check out the article. I have the MP conversion kit. Thanks!
>  >>
>  >> On Tuesday, March 15, 2022 at 5:52:44 PM UTC-7
>  >> 62-65-mail...@xxxxxxxxxxx wrote:
>  >>
>  >> > What are the sources of the brake parts you are using?
>  >> >
>  >> > Mopar Action / Richard Ehrenberg had / has an article that
>  > touches
>  >> > on "using currently-available [Last updated Jun 10,
>  >> > 2019] parts, with sourcing almost exclusively via boneyards,
>  > your
>  >> > local Chrysler dealer, and the corner auto-parts store."
>  >> >
>  >> > https://www.moparaction.com/2016/03/16/disc-main/
>  >> >
>  >> > Thanks,
>  >> > Gary H.
>  >> >
>  >> >> -------Original Message-------
>  >> >>
>  >> >> Hi all. Working on the restoration of my 1964 Sport Fury. I'm
>  >> > putting
>  >> >> disc brakes front and rear but don't know what kind of master
>  >> > cylinder
>  >> >> to use. Appreciate any help. Thanks/Butch --
>  >> >>
>  >>
>  >
>  > --
>  > --
>  > --
>  > Please address private email -- email of interest to only one
>  > person -- directly to that person. That is, email your parts/car
>  > transactions and negotiations, as well as other personal messages,
>  > only to the intended recipient. Do not just press "reply" and send
>  > your email to everyone using the general '62-'65 Clubhouse public
>  > email address. This practice will protect your privacy, reduce the
>  > total volume of mail and fine-tune the content signal to Mopar
>  > topic. Thanks!
>  >
>  > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
>  > http://www.1962to1965mopar.ornocar.org/mletiq.html and
>  > http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>  > --
>  > You received this message because you are subscribed to the Google
>  > Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
>  > http://groups.google.com/group/1962to1965mopars?hl=en.
>  > ---
>  > You received this message because you are subscribed to a topic in
>  > the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse"
>  > group.
>  > To unsubscribe from this topic, visit
>  >
>  https://groups.google.com/d/topic/1962to1965mopars/T73Kd-_1UxQ/unsubscribe.
>  > To unsubscribe from this group and all its topics, send an email to
>  > 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
>  > To view this discussion on the web visit
>  >
>  https://groups.google.com/d/msgid/1962to1965mopars/20220316163232.56018.qmail%40server309.com.
>  --
>  --
>  --
>  Please address private email -- email of interest to only one person
>  -- directly to that person. That is, email your parts/car transactions
>  and negotiations, as well as other personal messages, only to the
>  intended recipient. Do not just press "reply" and send your email to
>  everyone using the general '62-'65 Clubhouse public email address.
>  This practice will protect your privacy, reduce the total volume of
>  mail and fine-tune the content signal to Mopar topic. Thanks!
>  
>  1962 to 1965 Mopar Clubhouse Discussion Guidelines:
>  http://www.1962to1965mopar.ornocar.org/mletiq.html and
>  http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>  --
>  You received this message because you are subscribed to the Google
>  Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
>  http://groups.google.com/group/1962to1965mopars?hl=en.
>  ---
>  You received this message because you are subscribed to the Google
>  Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
>  To unsubscribe from this group and stop receiving emails from it,
>  send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
>  To view this discussion on the web visit
>  
https://groups.google.com/d/msgid/1962to1965mopars/CAH8ybuTauzhKiFb%2B9PLbo5pohk%2ByHg1GnPB5s8dV8yikQf
AJ-g%40mail.gmail.com.
>  

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/20220327211354.37059.qmail%40server309.com.