[AD removed for archives] ------------------------------------------------------------------- Show your pride with a free* USA T-shirt. Click here to confirm your address. caac2N5a/PermissionData ------------------------------------------------------------------- James, I have a complete '64 rear end sitting on jack stands in my garage, so I took measurements with both brake drums installed. Here's what I found: Outside of drum to outside of drum at axle flange - 61 1/2" Inner most edge of drum to drum - 53 3/16" Center of perch to center of perch - 44" Brian James Macione wrote: > > > I'm trying to verify some housing dimensions maybe one of you can help > me out. > > B Body > Housing width flange to flange > 62,63 and 64 Max Wedge = 53 1/4" > > Rear end width drum to drum > 62,63 and 64 Max Wedge =58 1/2" > > Spring perch width (center to center) > 62-70=44" > > Do those look correct? Do a custom Dana and only get one chance to do > it right. Thanks, JImM > [Non-text portions of this message have been removed] > '64 Belvedere Woodstock, IL. [AD removed for archives] ------------------------------------------------------------------- Click here and get your free* stock car racing gift. caac48Qf/PermissionData ------------------------------------------------------------------- ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. http:///u/?.