Re: trunion rebuild kit?

[HoustonDB@xxxxxxx]

[AD removed for archives]
-------------------------------------------------------------------
Click here and get your free* stock car racing gift.
caac48Qa/PermissionData
-------------------------------------------------------------------


I got one several years ago from NAPA and it included everything but the  
housing that the "u-joint" fits inside of.  
 
Word of caution:  The "cross-pin" can be a royal pain to get  out.  The 
machine shop I used maxed out their press trying and never did  get it out.  Also 
ended up bending the pin slightly. 
 
You might want to consider leaving the pin in.  You can work the boot  over 
the pin but it takes a lot of patience.  I ended up poking a hole in  mine 
while doing it.  And any holes will ultimately lead to the boot  ripping itself 
apart.  
 
Good luck!
Houston
 
 

[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Show your pride with a free* USA T-shirt.  Click here to confirm 
your address.
caac2N5f/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



http:///u/?.