RE: spray can sealer?

[Earl Helm <earlh@xxxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
How about a cruise on your favorite cruise line-from us?  Click 
here.
caac2NYa/PermissionData
-------------------------------------------------------------------

 Primer in a spray can from Walmart is not good. If you don't use an Epoxy,
or two part primer, you will not be protecting your parts from moisture.
It takes three things to form rust - FEO2 - Iron, water, oxygen. Regular
- one part - primer actually attracts moisture and will promote rust. So
unless you
use a professional product, "It Ain't Going To Happen Baby". Self etching
products in a spray can will work, but you still need to seal them with
a two part primer. Buy a cheap spray gun from Harbor freight, or a good
150.00 one, and learn to paint. It is not very hard. At first it is quite
intimidating, but that goes away quick.

Earl


hiya , i buy primer in a spray  can at walmart , dries in 10 minutes , you
will like it . 
     larry

[AD removed for archives]
-------------------------------------------------------------------
** Get Your Own Support-a-Cure Yellow Bracelet for $1.99 **   
Show your support for finding cures for both AIDS & Cancer. 
Get yours for just $1.99. This bracelet makes a difference.
caacYkkf/Penn Media
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



http:///u/?.