[AD removed for archives] ------------------------------------------------------------------- Claim your fully stuffed Christmas Stocking now caacVmdb7yoMza/PermissionData ------------------------------------------------------------------- Hello At last I found a 413 engine to my 1963 Fury. It´s from an 1965 Imperial. My question is, Is the exhaust manifolds the same on the 1965 Imperial as it should be on an normal BB engine (383?) to a 1963 Fury. The manifolds on the both sides is different in that way that where the exhaust flange should be mounted to the manifold is on the passangers side placed more at the rear of the manifolds and on the drivers side is it placed more in the middle. Is that correct ? or do I need to buy other exhaust manifolds ? Best regards, Thomas [Non-text portions of this message have been removed] [AD removed for archives] ------------------------------------------------------------------- 4 Free Low-Fat recipes caacVmeb7yoMzf/PermissionData ------------------------------------------------------------------- ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. b7yoMz.