Re: under hood blower clearance
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: under hood blower clearance



==========================================================
Extra! Extra! Read all about it! Get the latest weather,
sports, and lifestyle news you can't afford to miss, all
at a price you can afford to pay! Click now!
caaa9eYb7yoMza/TopOffers
==========================================================
Not only should you run a scoop, but you should not have the air enter straight into the butterflies as this will hurt you more than help. You're gonna have forced induction regardless, so you'd probably be happier with cowl induction. Your engine will stay cleaner, and you can even drive in the rain if you have to.


Dave Casey

----- Original Message ----- From: "Robert neal zimmerman" <northwestweirdo@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, December 01, 2004 9:46 PM
Subject: under hood blower clearance



==========================================================
Extra! Extra! Read all about it! Get the latest weather,
sports, and lifestyle news you can't afford to miss, all
at a price you can afford to pay!  Click now!
caaa9eYbUYx2xa/TopOffers
==========================================================
I have run in to an interesting problem today.
  I pulled the top of my 440 off in  the 64 polara, and gave a trial
  fitting of the blower and injector setup. The problem is that
  apparently I have  TOO MUCH hood clearance, exactly the opposite of
  what i thought I would encounter. I thought the blower would be
  sticking halfway thru the hood, but its all under the hood line. The
  hood line actually cuts about  1/3 of the way up the injector scoop
  right in the middle of the butterflies. Not very ideal for airflow. I
  might actually have to fashion a spacer between the blower and the
  injector to bring it up clearly in to the airstream.
  Dont ask me how it all fits under there.I couldnt believe it,
  actually wondered if something was wrong, like  somebody had jerry
  rigged the motor in and got it too low.
  And if i use a later  K frame that will move the motor back another 1
  1/2 inches which will effectively  move the hoodline even farther up
  over the butterflies considering the hood has a slight rise moving
  rearwards.
  Nonetheless it looks all incredibly vicious, an  8-71 blower is very
  big in person, looks like a 440 with a big watermelon sitting on it.
  gonna have to run a hood scoop over the whole setup, I dont think i
  have enough self esteem to drive a car down the road with a big shiny
  thing sticking thru the hood.
  Neal Zimmerman, Eugene Oregon


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!


'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.



----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


b7yoMz. 







Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.