[AD removed for archives] ------------------------------------------------------------------- Claim your fully stuffed Christmas Stocking now caacQ4Sb7yoMza/PermissionData ------------------------------------------------------------------- The previous owner of my '64 Belvedere installed air shocks on the rear. They work fine, however the upper portion of the shock hits on the rear axle tube. This has pushed in the bottom 2 inches of the top of the shock so that it is flat on that side. I'm installing another rear end and new springs, so I might as well install new air shocks while I'm at it. I'm hoping that others using air shocks can tell me if I have the correct set for my car. Here's the numbers off of one of the shocks: 729706 C99465A 377 If that's not the correct shock, could someone please tell me the proper number and brand to use. Thanks for your help...Brian '64 Belvedere Woodstock, IL. [AD removed for archives] ------------------------------------------------------------------- **Attention Vioxx Users: Merck Knew About harmful effects** You may be entitled to a cash settlement from Merck. No Obligation- just answer this 60 second survey to find out. caacTFyb7yoMzf/Penn Media ------------------------------------------------------------------- ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. b7yoMz.