Re: 413
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 413



[AD removed for archives]
-------------------------------------------------------------------
Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a FREE Cutlery Set + Cutting Board!
caacUaNb7yoMza/OmahaSteaks
-------------------------------------------------------------------


The 413 would definitely be a wedge regardless of whether in street wedge form (single 4bbl and downswept exhaust manifolds for street wedge vs 2 4bbl crossram with upswept high performance exhaust manifolds). Wedge refers to combustion chamber shape of the cylinder head. B series/RB series wedges have plugs on side of head vs hemispherical head which carried spark plugs on top of the heads requiring special rocher covers with tubes thru them to allow access to plugs. I believe a lower performance 413 was also available for low series Chrysler and other full size passenger car applications.

From: Thomas Thrue <thomas.thrue@xxxxxxxxxx>
Reply-To: 1962to1965mopars@xxxxxxxxxx
To: 1962to1965mopars@xxxxxxxxxx
Subject: Re: 413
Date: Fri, 26 Nov 2004 20:11:31 +0100

[AD removed for archives]
-------------------------------------------------------------------
Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a
FREE Cutlery Set + Cutting Board!
caacUaNbV7tWJa/OmahaSteaks
-------------------------------------------------------------------

Yeah I mean a Max wedge compared to a wedge 413. And also if it´s possible
to use a 1x 4 bbl carburator/intake manifold and normal exhaust manifold on
the max wedge.


Thomas
----- Original Message -----
From: "Gary H." <62to65mopar@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, November 23, 2004 8:17 PM
Subject: RE: 413


[AD removed for archives] ------------------------------------------------------------------- Get a Holy Bible for FREE! caacTFub6G6Rca/PermissionData -------------------------------------------------------------------

Any 413 is a wedge engine.

Do you mean what is a 413 Max Wedge as opposed to a 413 wedge?

Gary H.


Thomas Thrue wrote: > How can I be sure that a 413 engine is a wedge engine and not a normal > 413 engine. What´s the easiest way to found it out. Is it possible to > use a 1x4 bbl intake manifold and carburator on a wedge engine. If so > how big should the carburator be ? a 750cfm. Also possible to put normal > exhaust manifolds on such a engine ?

[AD removed for archives]
-------------------------------------------------------------------
Claim your fully stuffed Christmas Stocking now
caacQ4Sb6G6Rcf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic. Thanks!


'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.

[AD removed for archives]
-------------------------------------------------------------------
Free Thanksgiving recipes for you
caacQ4QbV7tWJf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!


'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.




[AD removed for archives]
-------------------------------------------------------------------
Attention Women! Win a $50,000 Ultimate Makeover! Become the newest ?Hottie? on the block. Or use the $50,000 how you wish. Make it yours below!
caacR6Pb7yoMzf/Vente
-------------------------------------------------------------------


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


b7yoMz. 







Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.