dwell vs gap

[john dahlin <kaldad1@xxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Stock car lovers - get a FREE gift here!
caacSnKb7yoMza/PermissionData
-------------------------------------------------------------------

have run into a little problem tuning up the old 300 today.  when i set the gap at .019" i get a dwell of 22-24.  usually in the past when i did a tune up .019" would be 30 degrees dwell.  this is a reman distributor, that came with the cheapie points etc.  which way do i go.  more gap = ?  or less gap =?   boy i wish i had an old distributor machine.
 
john
ps have the distributor out of the car on the work bench, my eyesight ain't what it was 35 years ago 8-(

--
[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Claim your fully stuffed Christmas Stocking now
caacQ4Sb7yoMzf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.