lacquer versus enamel

[Terry Lynch <terrytown@xxxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Free recipes to get you in shape
caacQ4Ob7yoMza/PermissionData
-------------------------------------------------------------------


I'm in the process of fixing up my vent wing window on my '62 D100 truck. I used Eastwood Rust Encapsulator as a base coat on the vent window frame channel and vertical post and now need to finish coat it . I went to the store yesterday and see that Dupli Color sells both an acrylic enamel and an acrylic lacquer in gloss black aerosol cans.

I've never messed with paints and such and am clueless what the difference is. Eastwood says that either will work on top of the Rust Encapsulate. What are the pro's & cons of each type of paint? What would hold up better to weather and retain it's gloss, etc. The channel around the window isn't a large area to paint, but I certainly don't want to be taking the whole assembly apart again in a few years because the paint faded or didn't hold up, etc.

Any thoughts or comments would be appreciated.

Thanks,
Terry Lynch
St. Petersburg, FL
[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
4 Free Low-Fat recipes
caacQ4Nb7yoMzf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.