[AD removed for archives] ------------------------------------------------------------------- Claim your fully stuffed Christmas Stocking now caacQ4Sb7yoMza/PermissionData ------------------------------------------------------------------- Dennis, I have a very nice Stock Poly four barrel manifold. It looks like I will never get to build a Poly motor with all the other projects I have going. Gary P and many others will tell you it is your best choice. I have a Weiand on my Poly, and I hate it. I was going to swap them, but I am just going to wait and insert the 440 replacement. These are hard to find, and even harder to find in this condition. If you interested contact me off list. They are square boars, so I would suggest a Holly street avenger. They are great carbs, and work well out of the box. Earl I have a 64 Belvedere that is a driver with a 2-barrel carb that is getting tired. I would like suggestions for a 4-barrel manifold and carb or a source for a good replacement for the 2-barrel. Thanks 64 Belvedere 63 Sport Fury (basket case) San Diego Y [AD removed for archives] ------------------------------------------------------------------- Free Thanksgiving recipes for you caacQ4Qb7yoMzf/PermissionData ------------------------------------------------------------------- ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. b7yoMz.