Re: Poly Stroker
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Poly Stroker



[AD removed for archives]
-------------------------------------------------------------------
Your Neighbors will envy your Garden when you get 100 bulbs on us
caacOlwb7yoMza/PermissionData
-------------------------------------------------------------------

Well that's disappointing. I guess the floating power issue would prevent me
from putting the TTI headers on my '57 Plymouth when the time comes.

Dave Casey

----- Original Message ----- 
From: "Brian Safford" <bsafford@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Monday, November 01, 2004 6:42 AM
Subject: Re: Poly Stroker


> [AD removed for archives]
> -------------------------------------------------------------------
> Get your Golden Tee CD ROM on us
> caacOlvbUYx2xa/PermissionData
> -------------------------------------------------------------------
>
> I didn't do the stroker, just added a mild cam and have tried a few
> different intake manifolds. Am currently running the Weiand Stealth and a
> 600 cfm Holley electric choke.  I have a P600 3-deuce intake that I might
> send away to have the carbs/linkage installed.
>
> I did install the TTI headers, though.  My 'Floating Power' motor mounts
> threw Bill Richardson for a bit of a loop, as he and TTI hadn't figured on
> any Poly cars having those mounts.  I had to get a set of replacement
> mounts, as the passenger side header wouldn't fit properly.
>
> Main issue here was with tightening the header bolts - there are a couple
of
> them that are almost impossible to get at with 'normal' wrenches.
>
> I also have some steering linkage clearance problems to figure out - not
> sure exactly what to do, as the engine needs to be raised up about 1/4
inch
> or so.
>
> I also installed the complete X-pipe exhaust system from TTI - wonderful
> experience there, as everything fit like a glove.
>
> Did all this work with my '62 Dart on jack stands.
>
> Regards,
> Brian Safford
> '62 Dart 440 4-door
>
> ----- Original Message ----- 
> From: "Nick Tiberio" <furyus63@xxxxxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Sunday, October 31, 2004 1:12 PM
> Subject: Poly Stoker
>
>
> [AD removed for archives]
> -------------------------------------------------------------------
> Your Neighbors will envy your Garden when you get 100 bulbs on us
> caacNoJbWk0Eja/PermissionData
> -------------------------------------------------------------------
>
> I'm still looking for anyone out there doing a Poly stroker rebuild. How
> many out there have installed their TTI hearders? I'll pass along and
> good or bad news as my project continues.
> Nick Tiberio
> 63 Fury
>
> [AD removed for archives]
> -------------------------------------------------------------------
> Get 4 Free low-fat, low-carb recipes
> caacNoLbWk0Ejf/PermissionData
> -------------------------------------------------------------------
>
> ----
> Please address private mail -- mail of interest to only one person -- 
> directly to that person.  I.e., send parts/car transactions and
negotiations
> as well as other personal messages only to the intended recipient, not to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to Mopar
> topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
> [AD removed for archives]
> -------------------------------------------------------------------
> Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a
> FREE Cutlery Set + Cutting Board!
> caacOlKbUYx2xf/OmahaSteaks
> -------------------------------------------------------------------
>
> ----
> Please address private mail -- mail of interest to only one person -- 
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>

[AD removed for archives]
-------------------------------------------------------------------
Are you serious about buying a NEW car or truck soon? 
Research before stepping on the car lot and save THOUSANDS!
Get NO OBLIGATION price quotes from car dealers in your area.
caacOlPb7yoMzf/LeadClick
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz. 










Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.