Re: two barrel problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: two barrel problem



[AD removed for archives]
-------------------------------------------------------------------
Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a 
FREE Cutlery Set + Cutting Board!
caacHOXb7yoMza/OmahaSteaks
-------------------------------------------------------------------

Sean, That is the needle part of the needle and seat for the carburetor and
will come in a new overhaul kit. It goes in with the point aiming in.
Gary Bradshaw Ft. Worth, Texas
----- Original Message ----- 
From: "Westerlund, Ken" <kwesterlund@xxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, October 01, 2004 7:28 AM
Subject: RE: two barrel problem


[AD removed for archives]
-------------------------------------------------------------------
Is America Safe? Give your opinion on Homeland Security and enter
to win!
caacHM9b7fOBRa/PermissionData
-------------------------------------------------------------------

Sean,
Check your service manual, but I don't think that belongs in there.
What you are describing sounds either like a needle valve (for the
float) or the anti-siphon valve for the accelerator pump circuit.

There should be no FOD in the fuel line (other than maybe a very small
filter screen at the carb.

Regards,
Ken

-----Original Message-----
From: Sean Bolter [mailto:bolterman@xxxxxxxx]
Sent: Friday, October 01, 2004 8:23 AM
To: 1962to1965mopars@xxxxxxxxxx
Subject: two barrel problem


Hey, guys,

My 1964 Poly has a two barrel Carter carb.  I unscrewed the fuel line to

it, and a triangle-shaped brass shaft fell out.  It is very small, and
has a point on one end, and is flat on the other.

Which way does this thing go?

thanks

[AD removed for archives]
-------------------------------------------------------------------
Save money and get healthy
caacHMMb7fOBRf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- 
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.

[AD removed for archives]
-------------------------------------------------------------------
Should School Prayer be mandatory? Give us your opinion and win.
caacHM5b7yoMzf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz. 











Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.