[AD removed for archives] ------------------------------------------------------------------- Save money and get healthy caacGKIb7yoMza/PermissionData ------------------------------------------------------------------- Tom - I'm going to go with the Melling which is on sale @ Jegs for 54$, same as Mopar. Melling says the body is CNC machined. When I built my 460 ferd, the shop recommended a standard volume/pressure pump saying the HV pump might empty the pan. Maybe this was because it was going in a 4x4 and would run at steep angles at times. Haven't had any problems with it. 50 lbs hot, (factory gauge). But Big D sez Mopars like oil so I'm going with the HV (not high pressure) pump since I went with the 1/2" pickup. Thanks for your imput! Joe -- [Non-text portions of this message have been removed] [AD removed for archives] ------------------------------------------------------------------- Is Gay Marriage a Civil Rights Issue? Click here and win. caacDvRb7yoMzf/PermissionData ------------------------------------------------------------------- ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. b7yoMz.