Re: Max wedge manifolds...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Max wedge manifolds...



[AD removed for archives]
-------------------------------------------------------------------
Should School Prayer be mandatory? Give us your opinion and win.
caacDvTb7yoMza/PermissionData
-------------------------------------------------------------------

It is my information that Ben is NOT the mfgr. but is selling them...the bad lot was refused by Ben as not being acceptable for retail sale...they're the ones that are on the market at the nat's..etc. ..Please understand I have been told this long distance and do not know this is fact...,..(in other words...I can't swear nothin' !)
Bob Fortson
----- Original Message ----- From: "Dave Walters" <whdavid@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, September 24, 2004 8:24 PM
Subject: RE: Max wedge manifolds...



[AD removed for archives] ------------------------------------------------------------------- Is Gay Marriage a Civil Rights Issue? Click here and win. caacDvRbNLZuMa/PermissionData -------------------------------------------------------------------


Bob Fortson wrote:


Ok fellows listen up! I have been looking all  over America for the
source of the "max wedge exhaust manifold reproductions" that were
offered for sale at Nationals. Good news and bad news...Bad news is that
the ones offered at national for 750 a set are the real deal...except
the HOLES ARE DRILLED WRONG...about a .25 of a inch wrong! The good news
is that there is a source that is doing these things as repro
originals...for the BAD boy engine...expensive as hell (were 800 a pop
if you bought 5 sets).
    My info is from a source on the west coast that asked not to be named
    for obvious reasons...be carefull ...there is room to wallow out the
    holes and make them fit but......
Bob Fortson
[Non-text portions of this message have been removed]

 Wasn't Ben Snobar the one making those?? Scott Smith/Harms Auto is
planning on doing those as well.Knowing him, they'll fit too.He found a
set of the Nascar manifolds to repop,but the owner wanted a $10K deposit
to let him use them.


Dave Walters Denver, Co.


[AD removed for archives] ------------------------------------------------------------------- Is Unemployment on the rise? Answer and Win! caacERJbNLZuMf/PermissionData -------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!


'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.

[AD removed for archives]
-------------------------------------------------------------------
Race to Claim your FREE Stock Car Racing Gift!
caacERRb7yoMzf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


b7yoMz. 









Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.